用电刷镀工艺修复飞机电缆插头及天线

在飞机电缆修理中,对于电缆线完好而电缆插头局部漏铜的现象,往往要重新更换一根新品。为了避免这种浪费,修理车间将插头从电缆上取下,送到表面处理车间电镀,然后再焊接到电缆线上。这样虽节约了成本,但多了两道工序,而且保证不了重新焊接的质量。同时,各种天线也存在着局部漏铜的问题,它们很难分解,但不分解就不能电镀,所以只好更换新品。     

以培养适用型人才为宗旨建立新型的校外学习中心管理体系

校外学习中心是远程教学和远程学习的活动基地。校外学习中心必须能适应市场经济形势需求,以培养适用型人才为宗旨,不断完善自身机制,实行规范化管理,不断提高教学管理工作水平,建立起新型的管理体系。     

数学教学中培养创造能力的探索

本文结合多年教学实践，对激发学生的创造意识，培养发散思维，运用创造技法等方面进行了探索。     

The Electron Radiation Belt

Electron radiation belts can change dramatically in a few seconds or slowly over years. Important issues in understanding such changes are: (1) What is the source of electrons in the radiation belts? (2) How important is radial diffusion compared to other radial transport mechanisms? (3) What are the detailed changes in the magnetosphere that produce radial diffusion? (4) Why is the response of the electron radiation belt to changes in the solar wind different from that of substorms and of the ring current? (5) Are processes other than radial transport, such as wave-particle interactions, important in energizing electrons in the radiation belts?     

深基坑支护——土钉墙的应用

介绍了土钉墙的基本原理和应用范围，通过土钉墙在南方某地铁车站的具体实例，说细介绍了土钉墙的施工工艺及施工方法，总结了土钉墙在应用中常见的问题及处理措施。     

High speed driving of a gain-switched laser diode with anexponential transmission line

With the increase of information capacity of an airborne system, high speed driving of laser diodes have been of interest. In order to match the low resistive LD, proposed in this paper is an exponential transmission line, which is used as preshaping to compensate the pattern effect in gain switching of laser diodes. It also will be used to overcome the effect of parasitic elements in high speed driving to improve the rise and trail edges of the output waveform. An accurate circuit model of the exponential line for the PSPICE program has been developed and simulations are conveniently carried out by employing PSPICE     

Further study of the Pencil-MUSIC algorithm

For finding 2-D angles and polarizations of waves arriving at a rectangular array of crossed dipoles, the Pencil-MUSIC method can achieve the near optimum performance with much less computational burden than the MUSIC (multiple signal classification). Following an angle-only ESPRIT (estimation of signal parameters via rotational invariance techniques) method, an angle-only Pencil-MUSIC can be easily formulated which is far more accurate than the former especially in the coherent case. The angle-only Pencil-MUSIC is analyzed and compared with the original Pencil-MUSIC. The new version sacrifices the polarization estimation to achieve about 8 times more efficient computation The accuracy of the new version seems no more than 4 times worse in terms of estimation deviation     

用于高压动态校准的快开阀装置

介绍一种高压快开阀装置。它可产生３７０ＭＰａ上升时间小于２０μｓ的阶跃压力，用于对高压传感器进行动态校准。     

复合材料层板中就位横向拉伸强度的研究

本文利用弹性力学和断裂力学方法对纤维增强复合材料的横向拉伸强度进行了分析，其中考虑了９０度开裂层厚度和开裂邻层的约束效应的影响，推导出正交各向异性对称铺层中昨合就位横向拉伸强度的数学表达式，得出开裂层的厚度和约束邻层铺设角对就位横向拉伸强度都有影响的结论，理论计算与Ｆｌａｇｇｓ实验结果吻合较好。     

飞机超差结构疲劳寿命量化评定

依据美机实用手册介绍的疲劳寿命S-N方程,对超差结构疲劳寿命推导出了一个量化评定方程。并应用该方程对一些典型结构超差形式具体地进行了疲劳寿命量化评定。实践证明,用本文介绍的方法对超差结构疲劳寿命进行定量评定,不仅简捷明快,而且结果可靠。